FlashRunner HS – High Speed Flash Programmer
FlashRunner HS – High Speed Flash Programmer
Modular Programming System Overview
FlashRunner HS is an exciting new distributed programming system that combines the modularity of a central control unit (Control unit) and up to 8 peripheral active modules (Active Modules) connected via a USB type-C cable. The result – a multi-end programming solution that perfectly responds to the needs of both Pre-Programming and In-System Flash Device Programming.
FlashRunner HS – High Speed Programmer Central Control Unit
The FlashRunner HS Central Control Unit is the host device for all of the modular peripherals.
-
-
-
10/100/1000 Ethernet LAN interface
-
USB/serial interface
-
ATE parallel control interface
-
-
Exceeding the FR2.0 specs, FlashRunner HS features a 800MHz ARM Cortex A9 dual-core, 1GB RAM memory and 256GB eMMC powerful architecture – well equipped for large-capacity file integration.
Adopting a sleek compact design, the programming module was designed for the closest proximity to the target board. Signal integrity and high communication frequency to the target board are ensured by an integrated digital signal within the peripheral programming module.
FlashRunner HS - High Speed Flash Programmer Universal Control Module
Three universal programming modules for MCU, MCP and Nor Flash. GP-1, GP-2 and GP-4 Support 1, 2, 4 channel parallel programming.
eMMC Programming Module
The eMMC programming module supports programming of eMMC with a width of 8bit bus. Supporting 1 and 2 channel parallel programming.
Nand Flash Programming Module
The Nand Flash programming module supports up to 16 bits bus Nand Flash programming.
Plug-in relay Barrier Module
The plug-in relay isolation barrier module is an additional daughter board, which functions as a relay isolation barrier. It can be directly plugged into the programming module or equipped with an optional auxiliary connector. System command allows for either programming module input or auxiliary connector input.
FlashRunner Connectivity
FlashRunner HS – High Speed Flash Programmer: The central control unit and the peripheral programming modules are connected through a USB type-C interface cable, which supports the USB 3.1 1 generation super high-speed standard. The longest cable length supported can reach 3m, or 9 feet.
The connecting line has a threaded locking connector (single screw facing the central control unit, double screw facing the burning module)
